Direct Energy Deposition: Difference between revisions

From Omic-AM
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
==Process description==
==Process description==
[[File:Neart-net-shapes-applications-2-web.png|right|frameless|567x567px]]
[[File:Neart-net-shapes-applications-2-web.png|right|frameless|567x567px]]
direct energy deposition is a combination of welding and additive manufacturing technologies. a high power heat source is used to deposit a feed stock directly onto the bed (typically welding it onto a sacrificial print bed). each layer is welded onto the last until the part is fully formed. typically the part must then be cut from the build plate.
Direct Energy Deposition (DED) combines welding with other technologies to produce parts through additive manufacturing. In this process, a high power heat source is used to melt and deposit a feed stock directly onto a plate (typically welding it onto a sacrificial print bed). Each layer is welded onto the last until the part is fully formed. The part must then be cut from the build plate, and post processed, usually through subtractive manufacturing such as milling, to produce a finished product.


DED also has the unique ability's to modify existing metal parts. it simply treats the old part as the print surface, and then any additions are built layer by layer as if printing a typical part.  
DED also has the unique ability to modify existing metal parts. By treating the old part as the print surface, it can build out new layers, similar to printing on a traditional build plate.  


== Strengths & Weaknesses ==
== Strengths & Weaknesses ==
The benefits of Direct Energy Deposition :
The benefits of Direct Energy Deposition:
* industrial scaling: DED machines are often much larger then other print types allowing this means large scale metal parts to be created.
* '''Industrial scaling''': DED machines are often much larger then other print types, enabling the production of fairly large parts.
* part modification: DED has the ability to add additional features onto weldable metal parts.
* '''Part modification''': DED has the ability to add additional features onto weldable metal parts, allowing for the combination of different manufacturing technologies or repair of broken parts.
The drawbacks of Direct Energy Deposition:
The drawbacks of Direct Energy Deposition:
*surface finish: although dependent on the feed stocked used, ded has very poor surface finish
*'''Surface finish''': Although the exact surface finish is dependent on the feed stocked, DED has very poor surface finish in general.
* high energy: because the constant melting of metal is required in the process ded uses very high amounts of energy
* '''High energy''': The constant melting of metal in the process uses very high amounts of energy.
* post processing: ded prints often need to be machined to fix geometries and surface finishes.
* '''Post processing''': DED prints often need to be machined to fix geometries and surface finishes.
 
== Machine Property Ranges ==
{| class="wikitable"
{| class="wikitable"
!
!
Line 30: Line 32:
|800
|800
|}
|}
==deposition types==
==Categories of DED==
the two primary factors that effect the deposition of ded printers is going to come from the kind of feed stock, and the variety of heat source used the way that material is supplied to the heat source
the two primary factors that effect the deposition of DED printers is going to come from the kind of feed stock, and the variety of heat source used the way that material is supplied to the heat source


'''Feed type'''
'''Feed type'''
Line 42: Line 44:
* electron beam: this is one of the less common heat sources for DED systems. it is very fast, and because it must be done in a vacuum contamination is limited.
* electron beam: this is one of the less common heat sources for DED systems. it is very fast, and because it must be done in a vacuum contamination is limited.


== technologies ==
== Technologies ==


* WAAM: wire arc additive manufacturing is the generic term for the combination of a plasma energy source and a wire feedstock  
* WAAM: wire arc additive manufacturing is the generic term for the combination of a plasma energy source and a wire feedstock  

Revision as of 11:08, 5 October 2023

Process description

Neart-net-shapes-applications-2-web.png

Direct Energy Deposition (DED) combines welding with other technologies to produce parts through additive manufacturing. In this process, a high power heat source is used to melt and deposit a feed stock directly onto a plate (typically welding it onto a sacrificial print bed). Each layer is welded onto the last until the part is fully formed. The part must then be cut from the build plate, and post processed, usually through subtractive manufacturing such as milling, to produce a finished product.

DED also has the unique ability to modify existing metal parts. By treating the old part as the print surface, it can build out new layers, similar to printing on a traditional build plate.

Strengths & Weaknesses

The benefits of Direct Energy Deposition:

  • Industrial scaling: DED machines are often much larger then other print types, enabling the production of fairly large parts.
  • Part modification: DED has the ability to add additional features onto weldable metal parts, allowing for the combination of different manufacturing technologies or repair of broken parts.

The drawbacks of Direct Energy Deposition:

  • Surface finish: Although the exact surface finish is dependent on the feed stocked, DED has very poor surface finish in general.
  • High energy: The constant melting of metal in the process uses very high amounts of energy.
  • Post processing: DED prints often need to be machined to fix geometries and surface finishes.

Machine Property Ranges

Low High
volume X/Y/Z (mm) 200/200/200 5080/2794/2794
resolution (mm) 1 .67
layer height (um) 800

Categories of DED

the two primary factors that effect the deposition of DED printers is going to come from the kind of feed stock, and the variety of heat source used the way that material is supplied to the heat source

Feed type

  • wire fed: Wire feeding will give a consistent flow of material to the deposition pool. This means that little material is wasted, but since the amount of material being deposited limits the complexity of parts available. this limited geometry also means that the surface finish is greatly affected.
  • powder fed: when using powder methods not all material being deposited ends up being used. this means that the size of the deposition is variable allowing for complex geometries, but a recycling system must be used

energy sources

  • laser: laser based ded systems allow for precise control over the hear source. when paired with powder feeding its best used when more complex geometries are needed.
  • plasma: due to the development of arc welding technology this tends to be the most energy efficient form of DED. normally paired with wiring feeding. it is best suited for large scale manufacturing.
  • electron beam: this is one of the less common heat sources for DED systems. it is very fast, and because it must be done in a vacuum contamination is limited.

Technologies

  • WAAM: wire arc additive manufacturing is the generic term for the combination of a plasma energy source and a wire feedstock
  • PL: Powder laser is the generic term for a combination
  • LENS: created by Optomec Laser engineered net shaping is a proprietary combination of a laser power source and a powder feeding system
  • EBAM: created by Sciaky electron beam additive is a propriety combination of a electron beam energy source, and a wire feedstock
  • RPD: Created by Norsk titanium rapid plasma deposition is an advanced version of WAAM
Retrieved from "https://omic-am.mme.pdx.edu/index.php?title=Direct_Energy_Deposition&oldid=155"